Craig & Vaughan(1994)による《研磨剤粒径》〔『Ore Microscopy and Ore Petrography (2nd ed.)』(22-23p)から〕



別ウィンドウに拡大
Figure 2.4 Relationship between grit, mesh, and micron size. Silicon carbide abrasive powders are generally classified in mesh or grit size. These are plotted on the left of the graph. The right-hand ordinate is scaled for emery grid designation. For conversion to micron size, locate the size range on the proper ordinate and transpose this point to the correct graph line while locating this point on the abscissa. Reverse this procedure to transpose micron to grit size. (Diagram courtesy of Buehler Ltd.)』

Table 2.1 Dimensions of Mesh or Grit Size Abrasives
Mesh or Grit Size Microns Inches
100 150 0.0059
200 75 0.0030
260 60 0.0024
325 45 0.0018
400 38 0.0015
600 30 0.0012
1,200 15 0.00059
1,800 9 0.00035
3,000 6 0.00024
8,000 3 0.00012
14,000 1 0.00004
60,000 1/2 0.00002
120,000 1/4 0.00001



戻る